Vehicle-mounted Lighting Monitoring System Truck Mounted Light Tower
Product structure and characteristics
The OK-CZ18SJ-2LED-20IP car lift light is an emergency lighting system. The product consists of six parts: chassis assembly, lifting rod assembly, pan/tilt assembly, luminaire assembly, control system components and aerospace cable.
1. Camera Support network / SDI / AHD 1.3 million / 2 million / 3 million and simulated movement, the shield supports temperature control and wiper function;
2. Lifting rod assembly The lifting rod is a key component of automotive lighting equipment. Oak has been manufacturing lift rods for five years, and its manufacturing process and technology are not only domestically leading, but also have reached the international first-class level.
3. PTZ components The PTZ used is an improved version of W.B. NIGHTSCAN PTZ. Its structure is more reasonable, its performance is more stable and reliable, and its appearance is more beautiful. At present, the PTZ has become an ancillary equipment for W.B. of the United States and GEROH of Germany.
4. The luminaire components adopt American CREE high-power LED chips, a total of 12 (10W each), rectangular matrix double-layer arrangement, aluminum alloy one-piece housing, compared with the round LED lamp head, with a larger projecting area, the distance is more Far, the light distribution is more uniform, the shape is better and the appearance is better.
5. Control system components
A separate integrated circuit uses two printed circuit boards for the control circuit and the lighting circuit respectively, which can effectively prevent the influence of large current on the control circuit, greatly reduce the phenomenon of burning the board during use, and make the equipment run more. Stable, lower failure rate.
B-integrated integrated air circuit With integrated modular design, the pneumatic components are integrated together, reducing the connection point by 50%, so the sealing performance is better, the structure is more compact and simpler.
C Box-type travel switch The travel switch used in this product (four in the two sets of Yuntai and two in the set of push rods) are all imported from Japan (OMRON). In particular, the two sets of travel switches of the PTZ are designed with integrated boxes, which have high precision and high reliability.
D Built-in electromagnetic sensor This product adopts built-in cylinder electromagnetic sensor (imported from Japan), which is the first in domestic and international, which makes the control distance more precise and the performance more stable and reliable.
E adopts dual control, wired RS485 control and wireless remote control configuration, and controls the lifting rod through the wireless remote control and RS485: up and down. Lighting, rotation, and other functions.
6. Aviation cable accessories shroud wiper, camera, lighting, lifting rod and RS485 control line adopt integrated professional aviation line design, simple and beautiful installation, avoiding the 3 or 4 sets of line design of some manufacturers in the market, cumbersome and installation inconvenient.
Product Tags:
|
|
DC12V 10A Truck Mounted Light Tower Lighting Monitoring System Aluminum Alloy Images
|
